When commercial vessels and offshore platforms suffer structural deformations from accidental collisions, grounding incidents, or cumulative seawater corrosion, determining whether the compromised vessel can safely navigate or withstand ambient sea states is an urgent operational requirement. Conventional post-accident assessment methods struggle to deliver both quantitative rigor and rapid turnaround during emergency response operations. Visual surveys conducted manually or via remotely operated vehicles capture qualitative cosmetic damage and coarse dimensional extents, yet they lack the capability to compute changes in hydrodynamic forces, wave loads, or dynamic motion responses. High-precision scaled testing inside towing tanks and wave flumes demands weeks of model fabrication and specialized facility access, making it entirely impractical for time-critical field scenarios. Single-point numerical simulations solve some computational bottlenecks but remain strictly constrained by their reliance on preexisting, pristine computer-aided design files that fail to reflect irregular physical buckling, member distortion, or localized hull indentation. To bridge this critical technical gap, a research team developed a rapid evaluation framework that integrates field optical imaging, artificial intelligence-driven three-dimensional geometric reconstruction, linear potential flow boundary element analysis, and structured emergency decision-making.
The engineering workflow establishes an uninterrupted computational bridge connecting initial on-site data gathering with actionable navigational advisories through four consecutive technical phases. In the opening stage, an image acquisition scheme captures multi-view overlapping optical data focusing specifically across undamaged and buckled structural zones, followed by photometric and geometric preprocessing. In the second stage, these photographic inputs are fed into the HunYuan3D foundation model architecture to synthesize a complete spatial representation, which subsequently undergoes automated topological repairs and surface mesh regularization to guarantee numerical suitability. In the third stage, this repaired volumetric mesh is transferred directly into an open-source hydrodynamic solver that applies the frequency-domain boundary element method to quantify how the geometric distortion degrades vessel seakeeping and hydrostatic stability reserves. In the final phase, an automated decision tree synthesizes these hydrodynamic performance metrics alongside significant wave heights and structural deformation severities to yield definitive risk classifications and vessel-handling recommendations. By establishing an automated computational chain across disparate software environments, the framework eliminates the traditional modeling bottlenecks that have historically prevented real-time hydrodynamic safety assessments in salvage and emergency response.
High-fidelity three-dimensional geometric generation from physical marine assets operating in volatile environments requires rigorous field acquisition protocols designed to overcome visual occlusions, wave interference, and marine lighting degradation. The multi-view imaging strategy organizes camera trajectories across four primary hull quadrants comprising bow, stern, port, and starboard sets, supplemented by dense, redundant viewpoints surrounding localized damage zones. Above-water hull sections exposed to open air are documented using unmanned aerial vehicles, whereas submerged underwater hull sections are documented using remotely operated vehicles equipped with dedicated artificial illumination arrays. Because real marine vessels undergo continuous oscillatory motions in surrounding waves, exposing variable vertical swaths of the outer shell plating over time, optical recording is conducted repeatedly over a specified temporal window. The resulting image sets captured across asynchronous intervals and differing vantage points are subsequently registered using the observable waterline position and physical reference markers distributed along the hull. Every acquired optical frame undergoes automated quality screening against established criteria for exposure, contrast, and edge sharpness, and any substandard or occluded frames are immediately discarded and re-acquired.
Surviving optical frames are processed using the open-source OpenCV computer vision library, where filtering algorithms execute sensor denoising, particle speckle suppression, lens distortion correction, and global brightness equalization to balance uneven marine lighting and compensate for refractive disturbances. The unified two-dimensional frames then enter the HunYuan3D modeling platform, an artificial intelligence generation framework developed by Tencent Hunyuan that reconstructs volumetric object geometry through a two-stage architecture coupling the LATTICE shape foundation model with a physically based rendering texture engine. Within the multi-view feature encoding stage, a Convolutional Neural Network and Transformer hybrid network extracts multi-scale visual features, while three-dimensional-aware Rotary Position Embedding encodes viewpoint spatial orientations. A multi-view attention mechanism operating with a shared attention mask synchronizes features across distinct camera positions without requiring prior explicit camera-pose registration. The fused visual latent representations are projected into a shape latent space structured by 3DShape2Vecset to define constrained latent variables. Reverse denoising sampling within a denoising diffusion probabilistic model framework generates shape latent vectors that are decoded into dense point clouds, from which Poisson surface reconstruction extracts a preliminary polygon mesh.
Because raw generated surface meshes frequently contain topological anomalies that derail hydrodynamic boundary element solvers, the pipeline subjects the preliminary geometry to automated optimization within MeshLab software. Automated hole-filling algorithms driven by region-growing methods close structural apertures while maintaining overall surface curvature continuity. Diagnostic routines detect and eliminate non-manifold edges, isolated degenerate facets, and duplicate polygonal faces to establish a closed, watertight manifold boundary. The mesh undergoes edge-collapse simplification to achieve manageable element densities and Laplacian smoothing to suppress non-physical high-frequency surface artifacts while preserving macro-scale hull contours. Once the outer surface mesh is exported as a watertight stereolithography file, the coordinates are scaled to match actual vessel physical dimensions based on known baseline parameters including designed draft and waterline length. The aligned model is imported into the hydrodynamic solver environment and clipped precisely at the design waterline, isolating the submerged wetted hull surface whose outward-pointing triangular boundary facets serve directly as computation panels for subsequent boundary integral formulations.
The hydrodynamic simulation engine utilizes Capytaine, an open-source frequency-domain numerical package derived from the well-established Nemoh boundary element solver code. Operating under linear potential flow theory, the solver treats the ambient seawater as inviscid, incompressible, and irrotational, ensuring the flow velocity potential satisfies the Laplace governing equation throughout the computational fluid domain. The fluid kinematics are subject to standard physical constraints, including the body surface non-penetration condition along the hull panels and linearized free-surface boundary conditions on the undisturbed waterplane. Green’s second identity transforms the domain Laplace equation into a boundary integral equation restricted solely to the discretized wetted surface panels. Solving the resulting linear algebraic matrix system yields velocity potentials across each discrete panel, which are numerically integrated to obtain hydrodynamic radiation and diffraction properties across a selected excitation frequency range spanning 0.05 to 2.0 radians per second. The program outputs six-degree-of-freedom added mass coefficients, wave radiation damping values, wave-exciting force vectors, and complex-valued Response Amplitude Operators.
To evaluate the geometric fidelity of the artificial intelligence generation pipeline before conducting full-scale hydrodynamic trials, researchers benchmarked the HunYuan3D reconstruction process against standard geometric primitives and maritime structures. Testing evaluated regular geometric bodies with known mathematical boundaries, specifically cubes and cylinders, alongside intact and deformed full-scale vessel models. Across all targets, geometric fidelity was evaluated against true computer-aided design reference geometries using four governing nautical metrics: waterline length, designed draft, displacement volume, and center of buoyancy coordinates. The empirical comparisons demonstrated that while regular geometric solids exhibited negligible reconstruction discrepancies, ship hulls introduced slightly elevated errors owing to their complex, doubly curved surface geometries and localized plating distortions. For the buckled ship model, geometric discrepancies rose marginally due to local structural unevenness, yet relative errors across all four governing parameters remained strictly below 3 percent. Because stability reserves and primary motion responses are governed by these global volumetric properties, controlling geometric deviations within this margin established an adequate foundation for numerical simulation.
The operational framework was validated on a demonstration model based on a commercial cargo ship measuring 239.44 meters in waterline length, 48.54 meters in breadth, 18.0 meters in designed draft, and displacing 143,000 metric tons in its intact configuration. Researchers introduced a representative collision damage scenario consisting of an extensive localized depression dent across the forward bow region on the port side, replicating structural distortion resulting from an impact with a floating offshore structure. Multi-view photographic images were synthesized and preprocessed before automated reconstruction in HunYuan3D and geometric cleanup in MeshLab. The reconstructed damaged mesh was imported into Capytaine to evaluate motion responses across four fundamental wave headings: head seas at 180 degrees, beam seas at 90 degrees, bow oblique seas at 45 degrees, and stern oblique seas at 135 degrees. The resulting response curves confirmed classical seakeeping principles, showing dominant surge and heave responses under head seas, pronounced sway and heave responses under beam seas, and simultaneous excitation across all six degrees of freedom during oblique wave encounters.
Quantitative comparison between the undamaged baseline vessel and the AI-reconstructed damaged cargo ship demonstrated significant performance degradation caused by the bow dent. The physical indentation altered the surrounding fluid flow field and compromised hydrostatic properties, reducing the vessel’s initial metacentric height, an essential metric of transverse stability reserve, by 6.67 percent, dropping from 1.50 meters down to 1.40 meters. In frequency-domain seakeeping simulations, Response Amplitude Operators exhibited substantial increases under wave excitation: roll motion Response Amplitude Operators surged by 17.54 percent, pitch motion responses increased by 2.27 percent, and sway motion responses grew by 2.74 percent. The dramatic escalation in roll amplitude indicated a direct deterioration in dynamic anti-capsizing capability and navigation stability.
The simulated hydrodynamic parameters and operational environmental inputs are integrated into an automated decision tree model that transforms numerical outputs into transparent emergency advisories within seconds. The decision logic evaluates the reduction in metacentric height alongside peak roll response amplifications and real-time significant wave heights characterizing local sea conditions. Under operational guidelines, if metacentric height falls below 0.15 meters or roll Response Amplitude Operators increase by more than 50 percent under moderate or rough seas where significant wave heights equal or exceed 2.5 meters, the emergency model designates a high risk level, mandating immediate suspension of navigation or operation and maintenance. If performance indicators degrade within manageable safety margins while prevailing sea states remain calm with significant wave heights below 1.0 meter, a medium risk classification applies, recommending operational restrictions such as strict speed reductions, avoidance of beam seas, platform load reductions, or steering prohibitions against aggressive large-angle turning maneuvers. For the tested cargo ship, exposure to wave heights exceeding 2.5 meters triggered medium-high risk mitigation measures, whereas calm seas below 1.0 meter permitted restricted transit under heightened structural monitoring.
An operational time and expenditure assessment highlights the logistical advantages of this computational approach compared to traditional maritime testing methodologies. Manual labor is confined entirely to two non-computational stages: on-site multi-view optical capture and interactive mesh post-processing in MeshLab. All intervening phases, including algorithmic image filtering, generative three-dimensional reconstruction, boundary element solver execution, and decision tree evaluation, proceed autonomously without human intervention. When structural damage resides entirely above the waterline, aerial drone photography requires 10 to 20 minutes, while subsequent filtering, AI reconstruction, hydrodynamic modeling, and risk evaluation require 5 to 10, 3 to 5, 5 to 10, and 3 to 5 minutes, respectively, yielding a total turnaround time of 30 to 50 minutes. Submerged hull assessments utilizing underwater remotely operated vehicles require longer optical acquisition and filtering times, extending the complete workflow to 1 to 2 hours, while complex damage spanning the active waterline requires synchronous aerial and underwater capture that concludes within 2 to 3 hours. Operating entirely through open-source software libraries, the framework avoids commercial licensing costs and eliminates expensive, multi-week physical scale testing inside towing tank facilities.
Notwithstanding these operational benefits, the framework maintains clear technical boundaries and deliberate engineering constraints within its intended scope as a preliminary emergency decision-support tool. Validation of the pipeline has thus far been demonstrated through numerical case studies rather than physical wave-basin experiments or instrumented field trials, prompting planned physical basin testing of reconstructed deformed models in subsequent research phases. Furthermore, because Capytaine relies on linear frequency-domain potential flow equations that neglect non-linear viscous roll damping, absolute roll amplitudes are generally overestimated, a bias that errs on the conservative side for emergency screening but requires specialized recalibration for diverse vessel classes and operating profiles. The visual reconstruction pipeline also remains vulnerable to severe underwater turbidity, intense backlighting, and low-illumination deep-water environments, and it currently cannot handle hull breach scenarios involving compartment flooding or structural rupture. Within these acknowledged limits, the framework delivers a rapid, low-cost screening tool that supplies quantitative data support without replacing comprehensive structural health assessments or statutory class verification.
Subject of Research: Rapid hydrodynamic performance evaluation of deformed marine structures using artificial intelligence 3D reconstruction
Article Title: A fast evaluation framework for the hydrodynamic performance of deformed marine structures using artificial intelligence-based three-dimensional reconstruction
Article References: Zhou, Y., Huang, J., Xie, C., & Zhang, Y. (2026). A fast evaluation framework for the hydrodynamic performance of deformed marine structures using artificial intelligence-based three-dimensional reconstruction. Discover Artificial Intelligence, 6(1), Article 1699. https://doi.org/10.1007/s44163-026-02685-z
Image Credits: AI Generated
DOI: 10.1007/s44163-026-02685-z
Keywords: hydrodynamics, marine engineering, 3D reconstruction, HunYuan3D, Capytaine, ship deformation, naval architecture, boundary element method, potential flow theory, emergency decision support, seakeeping, response amplitude operators, hull damage, computational fluid dynamics, offshore engineering, marine safety
